LUBRICO BREAK & CLUTCH CLEANER, it is special formulated product to clean oils, dirt, silicon and dust on the brake discs, brake drums, brake pads, clutch parts, transmission and differential gears. It can be used on oily and dirty machine parts, dirty metal surfaces, glass and ceramics, reliably.
FEATURES AND BENEFITS
It resolves oil and grease stains easily, evaporates rapidly and does not leave any stains. It stops the creaks of the brakes and provides optimal braking.
BREAK & CLUTCH CLEANER Regarding to dangerous material and preparation of the, preparation and delivery of security information files are preperated in accordance with regulations (R.G. 13.12.2014- 29204 Mük. Sayi ). MSDS Number: LUBRICO/GBF/074 Release Date:20/06/2015 Revision Number:01 Revision Date:08.01.2018 Page 2 / 8 3. COMPOSITION / INFORMATION ABOUT INGREDIENTS Chemical Composition CAS NO. EINECS No Rate (%) DSD Classification CLP Classification Hydrocarbons, C6, nalkanes, iso-alkanes, cyclics, n-hexane rich - 925-292-5 50 - 75 F; R11 Xn; R65, R67, R48/20 Xi; R38 N; R51/53 Flam. Liq. 2 – H225 Skin Irrit. 2 – H315 Asp. Tox. 1 – H304 Repr. 2 – H361 STOT SE 3 – H336 STOT RE 2 – H373 Methylene chloride 75-09-2 200-838-9 15-45 F; R36/38 Xn; R40, R67 Skin Irrit. 2 H315 Eye Irrit. 2 H319 Carc. 2 H351 STOT SE 3 – H336 Carbondioxide 124-38-9 204-696-9 5-10 - - 4. FIRST-AID MEASURES 4.1. Description of first aid measures General information; get medical attention if any discomfort continues. Inhalation; Remove the patient from danger area. Provide the person with fresh air. Bring to a stable side position and consult a doctor if there is issue of loss of consciousness. In contact with skin, remove all clothing which is contaminated and infected with the agent. Wash thoroughly with plenty of soap. May cause irritation, get medical attention. In contact with eyes, remove contact lenses. Immediately remove eyelids and wash with plenty water. Get medical attention if irritation persists. Swallowing, rinse your mouth thoroughly with water. Do not induce vomiting, give plenty of water to drink. Please consult your doctor immediately. In case of vomiting, the head should be kept below. 4.2. The most important acute and delayed symptoms / effects If there are any suspicious circumstances and symptoms, consult a doctor. 4.3. Indication of immediate medical attention and special treatment needed. No information available. 5. FIRE-FIGHTING MEASURES 5.1. Fire Extinguishers: CO2, Dry Chemical Powder, Water, alcohol-resistant foam 5.2. Special Damages Resulting material and preparation: In case of combustion, carbon dioxide, carbon monoxide and sulfur gas occurs. BREAK & CLUTCH CLEANER Regarding to dangerous material and preparation of the, preparation and delivery of security information files are preperated in accordance with regulations (R.G. 13.12.2014- 29204 Mük. Sayi ). MSDS Number: LUBRICO/GBF/074 Release Date:20/06/2015 Revision Number:01 Revision Date:08.01.2018 Page 3 / 8 5.3. Recommendations for Fire Fighting Teams: Explode during the fire. Keep a distance from unprotected people. Under risk containers should be cooled with water. Firefighting should be advised about the existence of aerosol cans. In case of fire, wear independent respiratory protective equipment with surrounding air and chemicals. 6. ACCIDENTAL RELEASE MEASURES 6.1. Personal Precautions, Protective Equipment and Emergency Procedures: Wear personal protective equipment. Look Section 8. Remove any sources of ignition. Do not smoke. Ensure adequate ventilation. Avoid contact with eyes and skin. Attention to slip hazard. 6.2. Environmental Measures: Prevent penetration into to the soil, surface and groundwater. Accumulation could be dangerous so that prevents leakage to sewers, basements and pits. In case of accidental leakage into sewers, notify the competent authorities. 6.3. Methods and materials to maintain and Clean: Aerosol / gas escapes, ensure ample fresh air. Without adequate ventilation, may explode mixture may occur. Take active ingredient with liquid collects material. Dispose of in Accordance with Section 13. 6.4. Other Partitioning Citations: In case of larger spills, notify the communication unit at 112. 7. HANDLING AND STORAGE 7.1. Precautions for Safe Handling: Ventilate the space well. Avoid the inhalation of vapor. Keep away from sources of ignition. Do not smoke. If necessary precautions should be taken against static discharges. Do not use on hot surfaces. Avoid contact with eyes and skin. Do not eat, drink, or smoke in the study area. Do not store with food items. Observe directions on label and instructions for use. Use working methods according to operating instructions. 7.2. Conditions for Safe Storage Dispute Involving: Keep out of the reach of unauthorized persons. Keep products in their original packaging and only the mouth is closed. Do not store items in gangways or stair. Do not store together with oxidizing agents. Observe special regulations for AEROSOLS prepared. Protect from direct sunlight and temperatures over 50 ° C. Store in a well ventilated area. 7.4. Specific end uses: Keep out of the reach of children. Classified as flammable gas in storage and transport. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION 8.1. Control parameters: Workplace limits to be worth checking that components are: Hydrocarbons, C6, n-alkanes, iso-alkanes, cyclics, n-hexane rich TLV - VME=20 ppm (72 mg/m3) (n-hexane(FRANCE&EU)) TLV - VLE=1500 mg/m3 (France C6-C12 hydrocarbons vapoursf